返回部落格
操作指南 2026-11-20 Dakine | Backpacks, Luggage, Surf, Snow, & Bike Gear Since ... 0 瀏覽

How to Clean and Maintain Your Snowboard Stomp Pad

How to Clean and Maintain Your Snowboard Stomp Pad

Learn how to clean and maintain your snowboard stomp pad for lasting traction. Tips for Dakine Pyramid Studs, Modular Mat, and Peak To Peak Stomp pads.

Why Cleaning Your Stomp Pad Matters

A stomp pad gives you reliable footing when you're one-footing to the chairlift or skating across flat sections. Over time, snow, dirt, and boot residue can reduce traction and weaken the adhesive. Regular cleaning keeps both the grip and the bond working well, so you don't slip or lose the pad mid-season.

Dakine Stomp Pad Materials at a Glance

  • Pyramid Studs Snowboard Stomp Pad: The Pyramid Studs are made from 100% zinc alloy (molded plated aluminum) and come with a peel-and-stick adhesive backing. Metal studs resist wear but can collect grime between the pyramid points. The adhesive needs a clean surface to stay stuck.
    Pyramid Studs Snowboard Stomp Pad
    Pyramid Studs Snowboard Stomp Pad
  • Modular Mat: The Modular Mat is made from 100% recycled thermoplastic polyurethane (TPU) with a 3M high-grade peel-and-stick adhesive and a raised scraper bar. TPU is flexible and durable, but the scraper bar and spike pattern can trap snow. The 3M adhesive holds best when the board surface is clean.
    Modular Mat
    Modular Mat
  • Peak To Peak Stomp: The Peak To Peak Stomp is made from 100% recycled TPU (molded lightweight EVA foam) with a 3M high-grade peel-and-stick adhesive. Lightweight foam is easy to clean but can be damaged by harsh chemicals. The adhesive requires a residue-free surface for a strong bond.

How to Clean Your Stomp Pad

You don't need special tools. A soft cloth, mild soap, and warm water are enough for most cleaning. Avoid solvents or abrasive pads that could damage TPU or leave residue on the adhesive.

  1. Remove the stomp pad from the board: If the adhesive is still strong, gently pry the pad off using a plastic scraper or your fingers. Work slowly to avoid bending metal studs or tearing foam pads.
  2. Wash the pad with mild soap and water: Use a soft cloth or sponge with a few drops of dish soap in warm water. Gently scrub the grip surface and any crevices. For the Pyramid Studs, pay attention to the spaces between the studs. Rinse with clean water.
  3. Dry the pad completely: Pat the pad with a towel, then let it air-dry for several hours. Any moisture trapped under the pad can weaken the adhesive or cause mold.
  4. Clean the board surface: Wipe the area where the stomp pad sits with rubbing alcohol or a mild degreaser to remove wax, dirt, and old adhesive residue. Let it dry fully before reapplying.
  5. Reapply the stomp pad: Press the pad firmly into place, working from the center outward. Apply even pressure as directed by the product instructions. Wait the recommended cure time before riding to let the bond cure.

Maintenance Tips for Long-Lasting Traction

Check your stomp pad at the start of each season. If the adhesive is peeling or the pad has shifted, remove it, clean both surfaces, and reapply. For the Modular Mat, the raised scraper bar can clear snow from your boot, but it also collects debris—rinse it after each day on the mountain. The Peak To Peak Stomp's foam is lightweight and low-profile, so it's less likely to snag but can wear faster if you drag your foot. The Pyramid Studs are the most durable option, but the metal can scratch your board if the pad shifts. Store your board in a cool, dry place to keep the adhesive from degrading.

What the Supplied Information Does Not Cover

The product records do not include specific cleaning intervals, temperature limits, or instructions for reusing adhesive after removal. If the original 3M backing loses its stickiness, you may need a new stomp pad. For metal studs, avoid using steel wool or abrasive cleaners that could scratch the finish.

相關文章

Customer Service
首頁
商品
購物車
我的