Start with the shell, then build the layers
A women's snow jacket and pant layering system works best when the outer layers handle weather and the inner layers handle warmth. The Sender Stretch 3L Jacket and Reach 20K 2L Pant are both non-insulated shells, so you control warmth by choosing what you wear underneath. That makes them flexible for cold resort days and milder spring laps.
Before you buy, check the fit and features that affect layering: the jacket's 4-way stretch and ergonomic fit, the pant's high-rise waist and relaxed articulated cut, and both pieces' venting. The details below come from the supplied product records, so you can match the setup to your body and your day.
Sender Stretch 3L Jacket: layering-friendly features
- Sender Stretch 3L Jacket - Women's: 20K/20K waterproof and breathable rating with a 100% recycled polyester face and a 4-way stretch construction. A 20K/20K shell blocks snow and releases sweat, while the stretch fabric moves with you when you add a midlayer.

Sender Stretch 3L Jacket - Women's - Sender Stretch 3L Jacket - Women's: Zippered pit vents and an Aquaguard center front zip. Pit vents let you dump heat on a climb without removing your pack or jacket; the water-resistant main zip adds protection.
- Sender Stretch 3L Jacket - Women's: Six secure pockets, including a media pocket and sleeve pass pocket. You can keep a phone, pass, and small essentials on your body instead of in a pack, which helps when you layer up.
- Sender Stretch 3L Jacket - Women's: Tri-pull adjustable fixed hood and anti-fog breath vent. The hood adjusts over a helmet or hat, and the breath vent helps manage moisture when you cover your face.
Reach 20K 2L Pant: fit and venting for layering
- Reach 20K 2L Pant - Women's: Non-insulated 2L pant with a 20K/20K laminate and PFC-free DWR. Without built-in insulation, you choose the base layer thickness; the 20K rating matches the jacket's weather protection.

Reach 20K 2L Pant - Women's - Reach 20K 2L Pant - Women's: High Rise Security waist and adjustable waistband with a relaxed articulated fit. A higher waist helps seal out snow when you bend and twist, and the adjustable band lets you fine-tune the fit over layers.
- Reach 20K 2L Pant - Women's: Inner leg vents with mesh and fully taped seams. Leg vents release heat on the skin track or a warm lift ride, while taped seams add waterproofing at the stitching.
- Reach 20K 2L Pant - Women's: Jacket-to-pant interface and reinforced scuff guards at the hems. The interface connects jacket and pant to keep snow out, and the scuff guards protect the hem from ski edges and parking-lot grit.
How to layer for a resort day
Use this sequence as a starting point, then adjust for temperature and activity. The shell pieces are fixed; the base and mid layers are your variables.
- Choose a moisture-wicking base layer: Pick a top and bottom that move sweat away from your skin. The Sender jacket's 20K breathability and pit vents help, but a damp cotton base will still chill you.
- Add a mid layer for warmth: A fleece or light synthetic jacket adds warmth under the Sender shell. Because the jacket has a 4-way stretch and ergonomic fit, it accommodates a moderate mid layer without feeling restrictive.
- Put on the Reach 20K pant over your base layer: The relaxed articulated fit leaves room for a base layer, and the high-rise waist sits above the hip. Adjust the waistband so the pant stays put when you move.
- Connect jacket to pant: Use the jacket-to-pant interface to seal the gap at your waist. This keeps snow out if you fall or hike through deep snow.
- Vent before you overheat: Open the pit vents and inner leg vents on the climb or when the sun comes out. Close them on the lift or when the wind picks up.
Fit and sizing notes
The Sender Stretch 3L Jacket comes in sizes S through XXL, and the Reach 20K 2L Pant comes in XS through XL. Both are available in Black in the supplied variant evidence. Check the size chart for your measurements; the records do not list garment measurements or a recommended layering allowance.
- Sender Stretch 3L Jacket: Ergonomic fit with 4-way stretch. If you plan to wear a bulky mid layer, consider sizing up; if you prefer a trim fit over a base layer, stay with your usual size.
- Reach 20K 2L Pant: Relaxed articulated fit with an adjustable waistband. The high-rise cut may feel different if you are used to low-rise pants; check the size chart for waist and inseam.
What the supplied information does not settle
The records do not list care instructions for either piece, so follow the care label on the garment. They also do not provide temperature ratings, insulation levels, or exact fit measurements. Use the feature list and size chart to make your decision, and treat any warmth claims as dependent on your base and mid layers.



